< Back to the Table of Contents


Note: Apple HomeKit requires a local connection provided by the 1Home Box or 1Home Bridge. It won't work with Cloud connection only.

Then connect Apple HomeKit to your Loxone or KNX smart home:

Register in the 1Home Dashboard, connect your smart home HERE via the Box/Bridge & click "Connect" next to Apple HomeKit on Connected Assistants page and follow the onboarding.

  • Open HomeKit application on your Apple device and follow the video (from 00:40): See the onboarding video.

  • Click Add Accessory button

  • Select your 1Home Box or 1Home Bridge device.

  • Enter or screenshot HomeKit pairing pin found here.

  • Apple will guide you through the setting up names and rooms.
    Hint: You can skip the wizard by closing the app and re-opening it.


Note: Apple HomeKit limit is maximum 150 devices or scenes. Enable only the devices you plan to control with voice and keep the device number under 150.

I don't have a HomePod smart speaker, but would still like to try voice control.

The smart speaker isn't necessary, but it has a slightly better voice recognition software and is more handy. You can use it via a smartphone or tablet, as long as you have the Home app installed.


Do you have any questions or suggestions?

Our support team is happy to help via Chat (blue button in the bottom right corner).


< Back to the Table of Contents

Did this answer your question?