Welcome to the 1Home Dashboard!

Your all-in-one place to prep your smart home for the future!

Please create an account if you haven't already, connect your smart home, a smart assistant and upgrade your KNX, Loxone or Gira smart home to the next level by changing the device types, renaming single devices, changing the connection (either via Cloud or hardware device, Box or Bridge).


The guide is divided into types based on what gateway type you've created in the Smart Home tab:


1Home Dashboard for KNX gateway type

  • Upload your ETS project file

Once you've connected your KNX smart home, you need to upload your ETS project file to the Smart Homes tab.


  • Move configuration

If you've upgraded from Cloud or have created a Cloud gateway by accident, please move the configuration to run through either the Box or the Bridge.

Here's how to move configuration to the 1Home Box and here to the 1Home Bridge.

  • Add a KNX device manually

To add a KNX device, please go to the Devices tab and click "+" in the top-right corner. Then add it by entering its group addresses from the ETS.

  • Change a room or device type

To change a room where the device is located or the device type that appears in your assistant mobile app, please change it by going to the Devices tab and click the settings icon next to the device.

  • Renaming devices and rooms

To rename the device, simply change its name or the room's name in the Devices tab

  • The voice command button

Go to your Devices tab and tap the voice command button to see all possible controls for your device types:

Proceed to tap a command to get a list of printable unique commands for your smart home:


1Home Dashboard for Loxone & Gira gateway type

  • Move configuration

If you've upgraded from Cloud or have created a Cloud gateway by accident, please move the configuration to run through either the Box or the Bridge.

  • Change a room or device type

To change a room where the device is located please go to the Devices tab and click the settings icon next to the device and select a different room.



To change the device type that appears in your assistant mobile app, please change it by going to the Devices tab and click on the device icon. Then you can select a different device type.

  • Renaming devices and rooms

To rename the device, simply change its name or the room's name in the Devices tab

  • The voice command button

Go to your Devices tab and tap the voice command button to see all possible controls for your device types:

Proceed to tap a command to get a list of printable unique commands for your smart home:


Do you have any questions or suggestions?

Please contact us via the chat button in the bottom right corner.

Did this answer your question?